Precise, easy 4 turns lock-to-lock. Standard 3/4″ round tapered steering shaft. Stainless steel cable output ends. Meets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes: – Helm – Bezel Kit – Steering Cable Specify your preferred steering cable length.
New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A=Center line of wheel to gunwale (or deck, if routed downward), B=Dash to transom, C=Gunwale to centerline of cable connection at centered tiller. Please refer to image below:
For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6″, then round up to the next foot. Order that length cable.For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6″ and round up to the next foot. Order that length cable.
Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows: For Rack Steering Cable Replacement, Measure Existing Cable as follows:
Measure plastic cable jacket (“Y” dimension shown in above drawing) in inches, add 30″, and round up to next foot. Order that length cable.